Stationary Pto - Kubota B3150 Operator's Manual

BStationary PTO
To park the tractor and use the PTO system (for chipper
or pump, for example), start the PTO system in the
following steps.
1. Apply the parking brake and place blocks at the tires.
2. Make sure the shift levers are at NEUTRAL, and start
the engine.
3. Set the PTO select lever to rear only position. [B3150
only]
4. Set the PTO clutch lever to engage "ON".
5. Set the engine speed to provide recommended rear
PTO speed.
6. Get off the tractor.
(1) Parking brake lever
(1) Parking brake lever
(A) Interlock the brake pedals
(B) "DEPRESS"
(C) "PULL DOWN"
(A) Interlock the brake pedals
(B) "DEPRESS"
(C) "PULL UP"
(1) PTO clutch lever
(2) PTO select lever
[B3150 only]
A If the PTO system is engaged and you stand up from
the seat and release the parking brake, the engine
stops automatically after standing up.
PTO 43
"ON"
"OFF"