3-Point Hitch Lowering Speed; Auxiliary Hydraulics; Hydraulic Block Type Outlet - Kubota B3150 Operator's Manual

B3-point Hitch Lowering Speed
To avoid personal injury or death:
A Fast lowering speed may cause damage or
injury. Lowering speed of implement should be
adjusted to 2 or more seconds.
The lowering speed of the 3-point hitch can be controlled
by adjusting the 3-point hitch lowering speed knob.
(1) 3-Point hitch lowering speed knob (A) "FAST"
(B) "SLOW"
(C) "LOCK"

AUXILIARY HYDRAULICS

Hydraulic outlet (rear) is provided on the tractor.
BHydraulic Block Type Outlet
Hydraulic block type outlet is useful when adding
hydraulically operated equipment such as front end
loader, front blade, etc.
When an implement is attached
1. Remove the block cover.
2. Attach the block outlet cover. (option)
[Rear outlet]
Hydraulic outlets are provided on the tractor.
(1) Block cover
(2) Block outlet cover (option)
(3) Outlet
(4) Inlet
A If the implement control valve has a relief valve, the
tank port flow from implement should be connected to
the port located on the right hand side of transmission
case.
HYDRAULIC UNIT
(A) To implement inlet
Max. flow
20.1 L/min
(5.3 U.S.gals./min)
Max. pressure
15.8 to 16.6 MPa
(161 to 169 kgf/
(2292 to 2408 psi)
(B) from implement outlet
51
)