Speed Control Pedal; Speed Set Device - Kubota B3150 Operator's Manual

32 OPERATING THE TRACTOR
8. Depress the Speed Control Pedal.
BSpeed Control Pedal
To avoid personal injury or death:
A Do not operate if the tractor moves on level
ground with the operators foot off of Speed
Control Pedal.
A Consult your local KUBOTA Dealer.
Forward Pedal
Depress the speed control pedal with the toe of your right
foot to move forward.
Reverse Pedal
Depress the speed control pedal with the heel of your right
foot to move backward.

(1) Speed control pedal

A To prevent serious damage to the HST, do not adjust
the stopper bolts.
A When you stand up from the seat with the speed
control pedal stepped on or the speed set device
engaged (ON), the engine will stop regardless of
whether the machine is moving or not. This is because
the tractor is equipped with Operator Presence Control
system (OPC).
(A) "FORWARD"
(B) "REVERSE"
BSpeed Set Device
[B3150 ROPS only]
To avoid personal injury or death:
A Pull the speed set lever completely to the up
position before starting the engine.
A Do not use the speed set device when driving
on the road.
A Be sure to connect both the left and the right
brakes to release the speed set device. The
speed set device won't be released with
singlebrake activation.
The Speed Set Device is designed for tractor operating
efficiency and operator comfort. This device will provide
a constant forward operating speed by mechanically
holding the speed control pedal at a selected position.
C To engage Speed Set Device
1. Accelerate speed to desired level using Speed Control
Pedal, and push the speed set lever down to the "ON"
position.
2. Release Speed Control Pedal and desired speed will
be maintained.
C To disengage Speed Set Device
A Pull the speed set lever upward.
A Depress both brake pedals.
(1) Speed set lever
(2) Speed control pedal
(A) "ON"
(B) "OFF"
(C) "Increase"
(D) "Decrease"