Ftp File Operations; Making Ftp Connections - Sony PDW-700 Operation Manual

FTP File Operations

File operations between this unit and a remote
computer can be carried out by the File Transfer
Protocol (called FTP below).
Preparations
1
Connect the network connectors of this
unit and a remote computer with a
network cable. Or connect this unit to
the network to which the remote
computer is connected.
2
On the NETWORK page of the
MAINTENANCE menu, set the IP
address and other network setting items
1)
for this unit.
For details on menu operations, see "Basic
menu operations" on page 139.
If network settings have already been
made
Check the IP address of this unit.
1) This unit is able to acquire an IP address
automatically from a DHCP server. It also
supports an Auto-IP function to assign an IP
address automatically when access from this unit
to the DHCP server times out. You can check
DHCP settings and the assigned IP address on the
NETWORK page of the MAINTENANCE
menu.
3
Turn the MENU knob to scroll to the
POWER SAVE page of the
OPERATION menu, then press the
MENU knob.
U07 POWER SAVE
ETHERNET/USB
iLINK(FAM)
REC AUDIO OUT
4
Move b to ETHERNET/USB then press
the MENU knob.
5
Turn the MENU knob to select
"ENABL", then press the MENU knob.

Making FTP connections

FTP connections between this unit and a remote
computer can be made with either of the
following.
• The command prompt
• FTP client software
This section explains how to use the command
prompt. For more information about using FTP
client software, refer to the documentation of the
FTP client software on your system.
To log in
If this unit is connected to a remote computer with
a FAM connection, first exit file operations on the
FAM connection (see page 174).
1
Load a disc into this unit and put the
unit into the following state.
Recording, playback, serch, and other disc
operations: Stopped
THUMBNAIL indicator: Off
Disc access by clip deletion, disc
formatting, or other operation:
Stopped
Picture Cache function: Off
MENU ON/OFF switch: OFF
Unsaved current clip list: Save or clear
Note
Login is not possible unless the unit is in the state
described above.
2
Start the command prompt.
TOP
: DSABL
: DSABL
: EE
FTP File Operations 177