Sony PDW-700 Operation Manual page 132

No. Page
17 AUTO IRIS 2 IRIS WINDOW
18 GENLOCK
19 ND COMP
20 AUTO
SHADING
21 APR
132 Menu List
Item Settings
1/2/3/4/5/6/VAR Selects the auto iris detection window.
IRIS WINDOW OFF/ON
IND
IRIS LEVEL (–99 to 99)
IRIS APL RATIO (–99 to 99)
IRIS VAR WIDTH 20 to 240 to 479 Adjusts the width of detection frame when the auto
IRIS VAR 20 to 135 to 269 Adjusts the height of detection frame when the auto
HEIGHT
IRIS VAR H POS –460 to 0 to 459 Adjusts the horizontal position of detection frame
IRIS VAR V POS –250 to 0 to 249 Adjusts the vertical position of detection frame
IRIS SPEED (–99 to 99)
CLIP HIGH OFF/ON
LIGHT
GENLOCK OFF/ON
GL HD H PHASE (–99 to 99)
GL SD H PHASE (–99 to 99)
REFERENCE INTERNAL/
GENLOCK
ND OFFSET OFF/ON
ADJUST
CLEAR ND EXEC
OFFSET
AUTO BLK EXEC
SHADING
RESET BLK SHD EXEC
TEST OUT VBS/Y/R/G/B/
SELECT LCD
MASTER –6dB/–3dB/0dB/
GAIN(TMP) 3dB/6dB/9dB/
12dB/18dB/
24dB/30dB/
36dB/42dB
APR EXEC
APR PRESET EXEC
Description
VAR: variable
Turns on and off the function which displays a
frame marker for the auto iris detection window.
Adjusts the level of the auto iris target value.
Adjusts the mix ratio of auto iris detection peak
value and average value.
iris detection window is set to VAR.
iris detection window is set to VAR.
when the auto iris detection window is set to VAR.
when the auto iris detection window is set to VAR.
Adjusts the auto iris speed.
Turns on and off the function which, during auto
iris adjustment, ignores very bright areas by dulling
the reaction to high luminescence.
Turns genlock on and off.
Sets the HD output H phase for genlock operation.
Sets the SD output H phase for genlock operation.
Displays the type of reference signal used by this
unit.
Turns on and off the mode which sets ND (neutral
density) filter color compensation values.
Clear ND filter color compensation values.
Execute the auto black shading correction function.
Clear black shading compensation values.
Selects the signal output of the TEST OUT
connector.
Temporarily sets the master gain value.
Execute the automatic pixel noise reduction
function.
Delete defect compensation data that was added by
execution of the APR and automatic black balance
adjustment functions.