Sony PDW-700 Operation Manual page 82

5
Turn the MENU knob to select "AUTO
NAMING" and then press the MENU
knob.
6
Turn the MENU knob to display
"TITLE" and then press the MENU
knob.
The same name will now be given to newly
recorded clips.
Notes
• An FTP client software that supports UTF-8 is
required to use Unicode characters other than ASCII
characters. Command prompt FTP commands do not
support UTF-8.
• When the first letter of the title setting on the CLIP
AUTO TITLING menu is a space or period (.), the clip
name is the title string minus the first letter.
To use clip names and clip list names by FAM
and FTP
Carry out steps 2 to 4 of "To assign clip names on
this unit".
It is now possible to write, transfer, and rename
clips and clip lists with user-defined names over
file access mode (FAM) connections (see page
173) and FTP connections (see page 177).
User-defined clip names can be used by FAM
and FTP
Sakura.SMI
User-defined clip list names can be used by FAM
and FTP
To check clip names
Press the THUMBNAIL button to display the
thumbnail screen, and select the clip whose name
you want to check.
The name of the selected clip appears in the upper
left of the screen.
See "Clip thumbnail screen" (page 84) for more
information.
82 Advanced Operations for Shooting
Fuji.MXF
Note
The item at the upper left of the screen is displayed
according to the following order of priority.
Title > user-defined clip name > standard format clip
name
Therefore, the display of this item changes as follows,
depending on whether or not there is a title.
• When a title has been set as a clip name on this unit,
the title is displayed for clips recorded on this unit.
• The user-defined name or standard format name is
displayed for clips without a title.
To check clip information (name, title, etc.)
For details, see "Checking clip properties" (page
95).