A remote computer can be connected to this unit
and used to operate on recorded data which has
been saved in data files, such as video and audio
There are two ways to connect a remote
• FAM connection
(i.LINK) S400 connector on this
unit to the i.LINK (IEEE1394) connector on the
remote computer, using an i.LINK cable (see
• FTP connection
Connect the network connectors on this unit and
the remote computer, using a network cable (see
The following figure shows the directory
structure of discs visible to a remote computer.
This structure is not the same as the actual structure
recorded on the disc.
a) Root directory
b) Only when NAMING FORM on the FILE NAMING
page of the OPERATION menu is set to "FREE"
File operation restrictions
This section explains which operations are
possible on files stored in each directory.
When required, the following operation tables
distinguish reading and writing from partial
reading and writing.