Sony PDW-700 Operation Manual page 130

No. Page
12 CAM
CONFIG 1
13 CAM
CONFIG 2
130 Menu List
Item Settings
REC TALLY OFF/ON
BLINK
REC START OFF/ON
BEEP
SUB LCD MODE TIMER/OFF/
SEL CONT
SUB LCD TIMER 1H/3H/8H
HDSDI REMOTE OFF/CHARA/
I/F G-TLY/R-TLY
TEST SAW SAW/REC
SELECT
COLOR BAR ARIB/100%/
SELECT 75%/SMPTE
USER & ALL OFF/ON
ONLY
RM COMMON OFF/ON
MEMORY
RM REC START RM/CAM/
PARA
SHT DISP MODE SEC/DEG
Description
Turns the tally illumination control on or off when
the battery is almost exhausted or the disc is almost
full.
Turns on or off the REC START/STOP alarm
sound.
Sets the timecode (TC) display after poweroff as
follows.
TIMER: The TC display turns off after the elapse
of the time set by the SUB LCD TIMER below.
OFF: Not displayed.
CONT: Displayed.
Sets the duration of time after which the TC display
is to be turned off after power-off, when the SUB
LCD MODE SEL item, above, is set to "TIMER"
(H: hours).
Selects whether to use the function that enables
recording control from this unit of an external
device connected to the SDI OUT 1/2 connectors
(HDSDI output) of this unit.
indication that shows whether the external device is
recording.
OFF: Do not use the remote recording control
function.
CHARA: Use the function, and indicate by the
controlling external device indicator in the
viewfinder (see page 30).
G-TLY: Use the function, and indicate by the
TALLY indicator in the viewfinder.
R-TLY: Use the function, and indicate by the REC
(recording, red tally) indicator in the
viewfinder.
Note
When R-TLY is selected, the REC indicator lights even
when the unit is not recording.
Selects the test signal.
Selects the HD color bar type.
Show only USER menu in the top menu.
Selects whether or not to share settings for when a
remote control unit is connected and when the unit
is used alone.
When an RM remote control unit is connected,
selects which recording start/stop buttons are
enabled.
RM: remote control unit
CAM: camcorder
PARA: both
Selects shutter speed display (seconds or degrees).
g)
Also selects the