Kenwood CKBU 300 Instructions For Use Manual page 19

AUTOMATIC COOKING
To cook in the oven in automatic mode
follow the instructions below:
1. Set the cooking time
2. Set the end of cooking time
3. Set the cooking temperature and
function
These operations are carried out as fol-
lows:
1. Set the cooking time by pressing but-
ton and then
or to move back if you have gone
beyond the required time (fig. 4.8).
The letter A and the symbol
appear.
2. Press button
already added to the clock time
appear.
Set the end of cooking time by press-
ing button ; if you go beyond the
required time, you can go back by
pressing button
The symbol
A remains on (fig. 4.9).
If during the setting the letter A
begins to flash on the display and the
acoustic signal comes on, this indi-
cates a programming error, i.e. the
cooking cycle has been superim-
posed on the clock time. In this case
alter the end of cooking time or the
cooking time as above.
A
Fig. 4.8
to move forward
; the cooking time
.
go out and the letter
3. Set the cooking temperature and
function via the function selector and
thermostat knob (see specific chap-
ters).
The oven is now programmed and
everything will work automatically; the
oven will come on as required and fin-
ish cooking at the programmed time.
At the start of the cooking the symbol
appear.
During cooking the letter A and the sym-
bol remains on; press button
display the remaining time until end of
cooking or press button
end of cooking time.
The cooking program can be cancelled
at any time by pressing the two buttons
simultaneously.
At the end of cooking, the oven switch
off, the symbol
flash and the acoustic signal come on -
this can be switched off by pressing any
of the buttons.
Reset the function selector and thermo-
stat knob and set the programmer to
manual by pressing the two buttons
simultaneously.
Important: Also if oven is turned off
automatically by the programmer,
remember to turn to the off position the
function selector and the thermostat
knob. If not, when pressing two buttons
simultaneously for manual use,
the oven will start to operate.
Remember to press the two buttons
simultaneously to be able to use
the oven in manual setting.
A
Fig. 4.9
to
to display the
go out, the letter A
19