Electrolux EDW 1506 Service Manual page 27

6.7.2. Input philosophy: alter program
l
Alter program after program start
LD3
1.
93
LD3
2.
93
blinkt
LD3
3.
93
3 Sekunden
Display blinkt
4.
110
Tür schließen
5.
110
1. To alter a program you have to open the door!
Tür öffnen
2. Program is stopped by opening the door.
3. Actuate key of the new desired program (in our example S5) for about 6 seconds.
S5
4. After this time the previous program LED and the program LED of the new
LD5
5. The cycle will start automatically when the door has been closed.
LD3
Ä Corresponding program LED is lit.
Ä Run time is indicated in the display.
Ä Display LED of running program starts flashing.
Ä Run time is indicated in the display.
desired program is lit.
Ä The display indicates the run time which is to be expected anew flashing.
If a program is altered after an already started cycle the new cycle starts
generally from the beginning! This is also indicated by the run time in the
display.
Options already selected before will be deleted and must be selected anew.
27
EDW 1503 / VGA
LD1
LD2 LD3 LD4 LD5 LD6 LD10
1 99
LD11
LD12
S1 S2 S3 S4 S5 S6 S0