Table of Contents
Advertisement
6.2. General information
l
Equipment in the panel area
(see description page B 1)
Possible equipment
w Separate ON/OFF switch S0 without optical confirmation
w 6 keys S1 to S6 to select programs or options with the corresponding LEDs
All keys are free and can be programmed without any restriction by the programming of
the appliance variant.
w 2.5-digit display and 3 LEDS (LD10 TO LD12)
Absolutely necessary minimum equipment:
Keys S0 (ON/OFF) and the first 3 keys S1 to S3 with the corresponding LEDs and display.
The keys S1 to S3 are absolutely necessary to select all customer respectively service
functions, such as setting of hardness!
l
Variant-depending existing equipment:
w Indication of start time by 2.5-digit display
Indication between 1 and 19 hours (in steps of 1h)
w Indication of remaining run time bys 2.5-digit display
indication of maximum run time "199"
w LED display for salt
w LED display fo rinse-aid
w LED display for water tap closed
w LED display for END
l
Functions which can be adjusted variably by the customer via the control
panel:
(see description page B 11-13)
w Indication and alteration of water hardness by display and acoustic output.
w Activation/deactivation of rinse-aid addition. Indication by display.
w Activation/deactivation of signal sound for end. Indication by display.
l
Miscellaneous:
w regeneration depending on need
w manufacturing test routine
w various service functions (fault memory, single actuator seletion ...)
w design of appliance for max. energy label AAA
w alternatively with or without fan drying
w aqua control system in different versions
depending on electr. and mech. components and the corresponding variant programming
l
Possible selectable program options:
w start-time preselection
w half load "small quantity" as automatic system or with key
w additional washing cycle
w 3 in 1 (special tablet program)
w senitize
21
EDW 1503 / VGA
LD1
LD2
LD3
LD4
LD5
LD6
LD10
1 99
LD11
LD12
S1
S2
S3
S4
S5
S6
S0
Advertisement
Table of Contents
