Page 1
46 & 55-INCH WUXGA SUPER NARROW BEZEL TFT-LCD MONITOR INSTRUCTION MANUAL Please read this manual thoroughly before use, and keep it handy for future reference.
Page 3
SAFETY INSTRUCTION ………………………………………………………….…… 2 ~ 3 CAUTIONS ……………………………………………………………......FCC RF INTERFERENCE STATEMENT ……………………………....... CONNECTING WITH EXTERNAL EQUIPMENT …………………………………… REMOTE FUNCTIONS ………………………………………………………………… CONTROLS AND FUNCTIONS ……………………………………………………….. 8 ~ 13 EXTENTENSIONAL IR RECEIVER FOR REMOTE CONTROLLER ..……………. MOUNTING GUIDE …………………………………………………………………….. D-SUB CONNECTOR PIN ASSIGNMENTS ………………………………………… POWER MANAGEMENT ………………………………………………………………...
Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Page 5
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus. - Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “WARNING – To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.” “The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.”...
Page 6
CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTIONN Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être située ou installée à...
NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
A. BACK PANEL CONTROL 1. DISPLAY PORT(OPTIONAL) 2. HDMI IN. 3. DVI. 4. VGA. 5. UPGRADE PORT 6. PC STEREO IN 7. PC STEREO OUT. 8. RJ-45. 9. RS-232C IN(OPTIONAL) 10. RS-232C OUT(OPTIONAL) 11. AC IN. ※ PC cable To use the “Model ID” function using RS-232 cable, the pin 4 in the PC cable must be deleted. 6 ……………………………………………………………………….
B. REMOTE CONTROLLER(Optional) 1. POWER( Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Selects an input source. 3. AUTO Auto geometry adjustment in the RGB PC source. 4. MUTE Mutes the sound.
Page 10
C. RIGHT SIDE BUTTON CONTROL 1 & 2. VOL(+) & VOL(-) Adjust the volume and menu settings. 3 & 4. ▲ & ▼ These buttons allow user to enter the sub-menu of the activated function. The up(▲) button is HOLD function and Auto switching functions.
On-screen Display Menus There are four (4) on-screen menus that allow you to your settings. Press the Menu button to access the OSD menu. Icon Menu Function Image Adjusts the Brightness, Contrast, Color Temperature, Zoom, and Information Bar settings Display Adjusts the Auto adjust, Phase, Clock, Display position and Auto color settings.
B. Display Menu To access the Display menu, press the Menu button on the front panel of the monitor, then press the Up and Down arrow buttons to select the Display icon. Press the Left arrow button to enter the menu, and then press the Up and Down arrow buttons to select a submenu.
C. Sound Menu To access the Sound menu, press the Menu button on the control panel of the monitor, then press the UP and Down arrow buttons to select the Sound icon. Press the Left arrow button to enter the menu, and then press the Up and Down arrow buttons to select a submenu. When finished, press the Menu button to save any changes, then press the Menu button again to exit the OSD.
D. System Menu To access the Sound menu, press the Menu button on the control panel of the monitor, then press the UP and Down arrow buttons to select the Sound icon. Press the Left arrow button to enter the menu, and then press the Up and Down arrow buttons to select a submenu. When finished, press the Menu button to save any changes, then press the Menu button again to exit the OSD.
Page 15
E. Monitor Control 1) TCP/IP MODE - Please select “TCP/IP” - Click the “IP Installer” - Click the “Update” in IP Installer window - Find Monitor(s) and if you click the “Model Search” button, it shows Model ID in the list - If you click the “Start”...
Page 16
- You can connect extensional IR receiver to the place you want using the stereo cable. - You can attach extensional IR receiver magnetic-designed to the monitor. 14 ………………………………………………………………………. INSTRUCTION MANUAL...
Page 17
Wall mounting (Optional) The LCD monitors are suitable for VESA standard wall mount (not included in the delivery). M8x12 screws M8x12 screws < 46 inch > < 55 inch > 1. 46-inch: VESA 600mm x 100mm x 100mm x 100mm. 2.
Page 18
▶ PIN ASSIGNMENTS Pin 1 RED VIDEO GREEN VIDEO SIGNAL CABLE DETECT BLUE VIDEO GROUND SDA(for DDC) GROUND H-SYNC.(or H+V SYNC.) RED GROUND V-SYNC. GREEN GROUND SCL(for DDC) BLUE GROUND D-SUB ▶ ACCESSORIES 1. Power cord In. (Out cable is Option) 2.
Page 19
This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The display power management signaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs this signaling system through not sending horizontal, vertical, or sync signal. This monitor enters an appropriate mode through identifying each of the three modes of the signaling system.
WEEE Symbols Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
Need help?
Do you have a question about the 55’’ WUXGA and is the answer not in the manual?
Questions and answers