Ati Crossfire Tm Technology Support; Requirements; Installing Crossfire Tm Graphics Cards - ECS A990FXM-A Manual

Chapter 6
ATI CrossFireX
TM
This motherboard supports the ATI CrossFireX
install multi-graphics processing units (GPU) graphics cards. Follow the installation
procedures in this section.

Requirements

1 Two or three identical CrossFireX
setup of 2-way / 3-way CrossFireX
2 You would need one or two CrossfireX
3 Make sure that your graphics card driver supports the ATI CrossFireX
technology. Download the latest driver from the ATI website
(www.ati.com).
4 Make sure that your power supply unit (PSU) can provide at least the
minimum power required by your system.
Installing CrossFireX
1. Insert the CrossFireX
card is properly seated on the slot.
A. For 2-way configuration, install two graphic cards on PCIEX16_1 & PCIEX16_2
and connect them with the CrossFire
ATI CrossFire
Technology Support
TM
graphics cards
TM
graphics cards into the PCIEX16 slots. Make sure that the
Technology Support
TM
TM
Technology that allows you to
TM
ready graphic cards are needed for the
TM
configuration.
TM
bridge cable.
TM
Bridge.
* For reference only
61
TM