Table of Contents
Advertisement
Quick Links
Copyright
This publication, including all photographs, illustrations and software, is protected
under international copyright laws, with all rights reserved. Neither this manual, nor
any of the material contained herein, may be reproduced without written consent of
the author.
Version 1.0
Disclaimer
The information in this document is subject to change without notice. The manufac-
turer makes no representations or warranties with respect to the contents hereof and
specifically disclaims any implied warranties of merchantability or fitness for any
particular purpose. The manufacturer reserves the right to revise this publication and
to make changes from time to time in the content hereof without obligation of the
manufacturer to notify any person of such revision or changes.
Trademark Recognition
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corp.
AMD, Phenom, Athlon, Sempron and Duron are registered trademarks of AMD
Corporation.
Other product names used in this manual are the properties of their respective
owners and are acknowledged.
Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment onto an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Shielded interconnect cables and a shielded AC power cable must be employed with
this equipment to ensure compliance with the pertinent RF emission limits govern-
ing this device. Changes or modifications not expressly approved by the system's
manufacturer could void the user's authority to operate the equipment.
Preface
Preface
Advertisement
Table of Contents
Troubleshooting
Related Manuals for ECS A990FXM-A
Summary of Contents for ECS A990FXM-A
- Page 1 Preface Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. Version 1.0 Disclaimer The information in this document is subject to change without notice.
-
Page 2: Declaration Of Conformity
Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interfer- ence that may cause undesired operation. Canadian Department of Communications This class B digital apparatus meets all requirements of the Canadian Interference- causing Equipment Regulations. -
Page 3: Table Of Contents
T T T T T ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS Preface Chapter 1 Introducing the Motherboard Introduction....................1 Feature.....................2 Motherboard Components..............6 Chapter 2 9 9 9 9 9 Installing the Motherboard Safety Precautions................9 Choosing a Computer Case..............9 Installing the Motherboard in a Case..........9... - Page 4 Save & Exit Menu.................46 Updating the BIOS...............47 Chapter 4 49 49 49 49 Using the Motherboard Software About the Software DVD-ROM/CD-ROM........49 Auto-installing under Windows XP/Vista/7........49 Running Setup................50 Manual Installation................52 Utility Software Reference...............52 53 53 Chapter 5 Setting Up AMD SB950 RAID Configuration Setting Up a Bootable RAID Array............53 61 61 61 61 61 Chapter 6...
-
Page 5: Introducing The Motherboard
Chapter 1 Introducing the Motherboard Introduction Thank you for choosing the A990FXM-A motherboard. This motherboard is a high performance, enhanced function motherboard that supports socket for AMD Phenom and later desktop processors (socket AM3+) for high-end business or personal desktop markets. -
Page 6: Feature
Feature Processor This motherboard uses a socket AM3+ that carries the following features: • Accommodates AMD Phenom and later desktop processors (socket AM3+) • Supports HyperTransport (HT) 3.0 interface speeds HyperTransport Technology is a point-to-point link between two devices, it enables integrated circuits to exchange information at much higher speeds than currently available interconnect technologies. -
Page 7: Onboard Lan
• Up to 32 GB per DIMM with maximum memory size up to 128 GB Audio • 7.1+2 Channel High Definition Audio Codec • Meets Microsoft WLP3.x (Windows Logo Program) audio require- ments • All DACs supports 44.1k/48k/96k/192kHz sample rate •... -
Page 8: Specifications
Specifications • AMD Phenom and later desktop processors (socket AM3+) • Supports HyperTransport (HT) 3.0 interface speeds • 140W TDP Chipset • NB: AMD 990FX SB: SB950 Memory • Dual-channel DDR3 memory architecture • 4 x 240-pin DDR3 DIMM sockets support up to 128 GB •... - Page 9 • 1 x 3-pin SYS_FAN connector • 1 x 3-pin PWR_FAN connector System • AMI BIOS with 32Mb SPI Flash ROM BIOS • Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot • Supports ACPI & DMI •...
-
Page 10: Motherboard Components
Motherboard Components The above image is for reference only; please take the actual motherboard for detailed parts. Introducing the Motherboard... - Page 11 Table of Motherboard Components LABEL COMPONENTS AMD Phenom and later desktop processors 1. CPU Socket (socket AM3+) 2. CPU_FAN CPU cooling fan connector 3. DDR3_1/2/3/4 240-pin DDR3 SDRAM slots 4. BZ Buzzer 5. ATX_POWER Standard 24-pin ATX power connector 6. POST POST Debug LED 7.
- Page 12 Memo Introducing the Motherboard...
-
Page 13: Installing The Motherboard
Chapter 2 Installing the Motherboard Safety Precautions • Follow these safety precautions when installing the motherboard • Wear a grounding strap attached to a grounded device to avoid dam- age from static electricity • Discharge static electricity by touching the metal case of a safely grounded object before working on the motherboard •... -
Page 14: Checking Jumper Settings
Do not over-tighten the screws as this can stress the motherboard. Checking Jumper Settings This section explains how to set jumpers for correct configuration of the motherboard. Setting Jumpers Use the motherboard jumpers to set system configuration options. Jumpers with more than one pin are numbered. -
Page 15: Checking Jumper Settings
Checking Jumper Settings The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled. Name Type Description Setting (default) 1-2: NORMAL 2-3: CLEAR 1 2 3 CLR_CMOS 3-pin Clear CMOS Before clearing the CMOS, make sure to CLR_CMOS turn off the system. -
Page 16: Installing Hardware
Installing Hardware Installing the Processor Caution: When installing a CPU heatsink and cooling fan make sure that you DO NOT scratch the motherboard or any of the surface-mount resis- tors with the clip of the cooling fan. If the clip of the cooling fan scrapes across the motherboard, you may cause serious damage to the motherboard or its components. -
Page 17: Installing Memory Modules
CPU Installation Procedure The following illustration shows CPU installation components. Install your CPU. Pull up the lever away from the socket and lift up to 90-degree angle. Locate the CPU cut edge (the corner with the pin hold noticeably missing). Align and insert the CPU correctly. -
Page 18: Installation Procedure
Installation Procedure Refer to the following to install the memory modules. This motherboard supports unbuffered DDR3 SDRAM only. Push the latches on each side of the DIMM slot down. Align the memory module with the slot. The DIMM slots are keyed with notches and the DIMMs are keyed with cutouts so that they can only be installed correctly. -
Page 19: Expansion Slots
Expansion Slots Installing Add-on Cards The slots on this motherboard are designed to hold expansion cards and connect them to the system bus. Expansion slots are a means of adding or enhancing the motherboard’s features and capabilities. With these efficient facilities, you can in- crease the motherboard’s capabilities by adding hardware that performs tasks that are not part of the basic system. - Page 20 Follow these instructions to install an add-on card: Remove a blanking plate from the system case corresponding to the slot you are going to use. Install the edge connector of the add-on card into the expansion slot. Ensure that the edge connector is correctly seated in the slot. Secure the metal bracket of the card to the system case with a screw.
-
Page 21: Connecting Optional Devices
Connecting Optional Devices Refer to the following for information on connecting the motherboard’s optional devices: SATA1~6: Serial ATA connectors These connectors are used to support the new Serial ATA devices for the highest data transfer rates (6.0 Gb/s), simpler disk drive cabling and easier PC assembly. It elimi- nates limitations of the current Parallel ATA interface. - Page 22 F_USB1~2: Front Panel USB 2.0 headers The motherboard has six USB ports installed on the rear edge I/O port array. Addi- tionally, some computer cases have USB ports at the front of the case. If you have this kind of case, use auxiliary USB connector to connect the front-mounted ports to the motherboard.
- Page 23 USB3F: Front Panel USB 3.0 header This Motherboard implements one USB 3.0 header supporting 2 extra front USB 3.0 ports, which delivers 5Gb/s transfer rate. Signal Name Function Vbus Front Panel USB Power IntA_P1_SSRX- USB3 ICC Port1 SuperSpeed Rx- USB3 ICC Port1 SuperSpeed Rx+ IntA_P2_SSRX+ IntA_P1_SSTX- USB3 ICC Port1 SuperSpeed Tx-...
-
Page 24: Installing A Hard Disk Drive/Cd-Rom/Sata Hard Drive
Installing a Hard Disk Drive/CD-ROM/SATA Hard Drive This section describes how to install IDE devices such as a hard disk drive and a CD- ROM drive. About IDE Devices Your motherboard has one IDE interface. An IDE ribbon cable supporting two IDE devices is bundled with the motherboard. - Page 25 Refer to the illustration below for proper installation: Attach either cable end to the connector on the motherboard. Attach the other cable end to the SATA hard drive. Attach the SATA power cable to the SATA hard drive and connect the other end to the power supply.
-
Page 26: Connecting I/O Devices
Connecting I/O Devices The backplane of the motherboard has the following I/O ports: Bluetooth Used to connect to Bluetooth devices. PS/2 mouse and Connect the PS/2 Keyboard or PS/2 Mouse to the PS/2 keyboard combo combo port. connector CLR_COMS_BTN Use the CLR_CMOS button to clear CMOS. USB 2.0 Ports Use the USB 2.0 ports to connect USB 2.0 devices. -
Page 27: Connecting Case Components
Connecting Case Components After you have installed the motherboard into a case, you can begin connecting the motherboard components. Refer to the following: Connect the CPU cooling fan cable to CPU_FAN. Connect the standard power supply connector to ATX_POWER. Connect the case switches and indicator LEDs to the PANEL. Connect the system cooling fan connector to SYS_FAN. -
Page 28: Connecting 8-Pin Power Cable
Connecting 8/4-pin power cable Users please note that the 8-pin and 4-pin power cables can both be con- nected to the ATX12V connector. When installing 8-pin power cable, the latches of power cable and the ATX12V connector match perfectly. * For reference only 8-pin power cable When installing 4-pin power cable, the latch falls on the left side of the... - Page 29 SYS_FAN: FAN Power Connector Signal Name Function System Ground Power +12V +12V Sense Sensor PWR_FAN: FAN Power Connector Signal Name Function System Ground Power +12V +12V Sense Sensor ATX12V: ATX 12V Power Connector Signal Name Signal Name Ground +12V Ground +12V Ground +12V...
-
Page 30: Front Panel Header
Front Panel Header The front panel header (F_PANEL) provides a standard set of switch and LED headers commonly found on ATX or Micro ATX cases. Refer to the table below for informa- tion: Signal Function Signal Function HD_LED_P Hard disk LED (+) 2 FP PWR/SLP *MSG LED (+) HD_LED_N Hard disk LED (-) FP PWR/SLP *MSG LED (-) -
Page 31: Using Bios
Chapter 3 Using BIOS About the Setup Utility The computer uses the latest “American Megatrends Inc. ” BIOS with support for Windows Plug and Play. The CMOS chip on the motherboard contains the ROM setup instructions for configuring the motherboard BIOS. The BIOS (Basic Input and Output System) Setup Utility displays the system’s configuration status and provides you with options to set system parameters. -
Page 32: Resetting The Default Cmos Values
Press the delete key to access the BIOS Setup Utility. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset M.I.B X Boot Security Save & Exit Choose the system default BIOS Information language System Date [ Mon 04/18/2011] System Time [05:44:29] :Select Screen... -
Page 33: Using Bios
Using BIOS When you start the Setup Utility, the main menu appears. The main menu of the Setup Utility displays a list of the options that are available. A highlight indicates which option is currently selected. Use the cursor arrow keys to move the highlight to other options. -
Page 34: Main Menu
Main Menu When you enter the BIOS Setup program, the main menu appears, giving you an overview of the basic system information. Select an item and press <Enter> to display the submenu. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset... -
Page 35: Advanced Menu
Advanced Menu The Advanced menu items allow you to change the settings for the CPU and other system. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset M.I.B X Boot Security Save & Exit Enable or Disable Boot Option Legacy OpROM Support for Leagacy Network Devices. -
Page 36: Pc Health Status
PC Health Status On motherboards support hardware monitoring, this item lets you monitor the parameters for critical voltages, temperatures and fan speeds. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset M.I.B X Boot Security Save & Exit PC Health Status Smart Fan Function CPU Tcontrol... - Page 37 Smart Fan Mode (Normal) This item allows you to select the fan mode (Normal, Quiet, Silent, or Manual) for a better operation environment. If you choose Normal mode, the fan speed will be auto adjusted depending on the CPU temperature. If you choose Quite mode, the fan speed will be auto minimized for quiet environment.
-
Page 38: Power Management Setup
Power Management Setup This page sets up some parameters for system power management operation. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset M.I.B X Boot Security Save & Exit About Resume by Power Management Setup PCI/PCI-E/Lan/Ext. -
Page 39: Acpi Configuration
ACPI Configuration The item in the menu shows the highest ACPI sleep state when the system enters suspend. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset M.I.B X Boot Security Save & Exit Select the highest ACPI sleep ACPI Configuration state the system will enter when the SUSPEND button is... -
Page 40: Cpu Configuration
CPU Configuration Scroll to this item and press <Enter> to view the following screen: Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset M.I.B X Boot Security Save & Exit Disabled for Windows XP CPU Configuration Socket0: AMD Athlon (tm) II X3 440 Processor 0 Max Speed: 3000 MHZ Intended Speed:3000 MHZ Microcode Patch Level:10000c6... -
Page 41: Sata Configuration
SATA Configuration Use this item to show the mode of serial-ATA configuration options. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset M.I.B X Boot Security Save & Exit Enabled/Disabled SATA SATA Configuration Contreller Serial-ATA Controller [Enabled] SATA Mode [IDE Mode]... -
Page 42: Usb Configuration
USB Configuration Scroll to this item and press <Enter> to view the following screen: Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset M.I.B X Boot Security Save & Exit Enabled/Disabled All USB USB Configuration Devices All USB Devices [Enabled] USB 3.0 Support... -
Page 43: Chipset Menu
Chipset Menu The chipset menu items allow you to change the settings for the South Bridge chipset and other system. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset M.I.B X Boot Security Save & Exit South Bridge Parameters South Bridge :Select Screen... -
Page 44: Mb Intelligent Bios X) Menu
M.I.B X(MB Intelligent BIOS X) This page enables you to set the clock speed and system bus for your system. The clock speed and system bus are determined by the kind of processor you have in- stalled in your system. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. - Page 45 AltVid (0) This item specifies the VID driven to the VDD power plane(s) while in the low power state 0:24N:3xDC[6:0]. Slam Time Mode (Auto) This item enables you to set slam time mode, this option is only for RB-C3, BL- C3, DA-C3.
- Page 46 HT Control Scroll to this item and press <Enter> to view the following screen: Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset M.I.B X Boot Security Save & Exit Set Upstream Link Width. HT control Current Width Up: 16 bit Upstream Link Width...
- Page 47 CPU Voltage (Default) This item allows user to adjust CPU voltage when enabled. NB Voltage (Default) This item allows user to adjust NB voltage when enabled. VDIMM Voltage (Default) This item allows user to adjust DIMM voltage when enabled. SB Voltage (Default) This item allows user to adjust SB voltage when enabled.
-
Page 48: Boot Menu
Boot Menu This page enables you to set the keyboard NumLock state and Boot device priority. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset M.I.B X Boot Security Save & Exit Select the keyboard Numlock Boot Configuration state Bootup Numlock State... -
Page 49: Security Menu
Security Menu This page enables you to set setup administrator and password. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset M.I.B X Boot Security Save & Exit Set Setup Administrator Administrator Password Password :Select Screen :Select Item Enter : Select +/- : Change Opt. -
Page 50: Save & Exit Menu
Save & Exit Menu This page enables you to exit system setup after saving or without saving the changes. Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset M.I.B X Boot Security Save & Exit Exit system setup after saving Save Changes and Exit the changes. -
Page 51: Updating The Bios
Updating the BIOS You can download and install updated BIOS for this motherboard from the manufacturer’s Web site. New BIOS provides support for new peripherals, improve- ments in performance, or fixes for known bugs. Install new BIOS as follows: If your motherboard has a BIOS protection jumper, change the setting to allow BIOS flashing. - Page 52 Memo Using BIOS...
-
Page 53: Using The Motherboard Software
Chapter 4 Using the Motherboard Software About the Software DVD-ROM/CD-ROM The support software DVD-ROM/CD-ROM that is included in the motherboard package contains all the drivers and utility programs needed to properly run the bundled products. Below you can find a brief description of each software program, and the location for your motherboard version. -
Page 54: Running Setup
Drivers Click the Setup button to run the software installation program. Setup Select from the menu which software you want to install. Click the Utilities button to display the application software and Utilities other software utilities that are available on the disk. Select the sofware you want to install then follow installation procedure. - Page 55 Click Next. The following screen appears: Check the box next to the items you want to install. The default options are recom- mended. Click Next run the Installation Wizard. An item installation screen appears: Follow the instructions on the screen to install the items. Drivers and software are automatically installed in sequence.
-
Page 56: Manual Installation
Windows Vista/7 will appear below UAC (User Account Control) message after the system restart. You must select “Allow” to install the next driver. Continue this process to complete the drivers installation. Manual Installation Insert the disk in the DVD-ROM/CD-ROM drive and locate the PATH.DOC file in the root directory. -
Page 57: Setting Up Amd Sb950 Raid Configuration
Chapter 5 Setting Up AMD SB950 RAID Configuration Setting Up a bootable RAID Array This section explains how to configure a bootable AMD RAID array. Setting Up the BIOS Start your computer, then press Delete to enter the BIOS setup. The BIOS CMOS Setup Utility screen appears. -
Page 58: Entering The Raid Bios Setup
Press F4 to save the configuration and exit. The PC reboots. Enter the RAID BIOS Setup by pressing Ctrl-F when prompted, and proceed to set up the AMD RAID BIOS as described in the next section. Configuring the AMD RAID BIOS (Windows XP Installation) The AMD RAID BIOS set up lets you choose the RAID type and which hard drives you want to make part of the array. - Page 59 Select [2], then select LD 1 in the following page. The Define LD Menu screen appears (Figure 1.4). FastBuild (tm) Utility (c) 2006 ATI Technology, Inc. [ Define LD Menu ] LD No RAID Mode Total Drv LD 1 RAID 0 Stripe Block : 64 KB Past Init :...
-
Page 60: Assigning The Disks
Assigning the Disks 1. Select the Assignment to Y to designate a free disk to be used as a RAID array disk. Figure 1.5 illustrates the Define a New Array screen after two disks have been assigned as RAID 0 array disks. FastBuild (tm) Utility (c) 2006 ATI Technology, Inc. - Page 61 Press ESC to exit. The Main Menu screen appears (Figure 1.7). FastBuild (tm) Utility (c) 2006 ATI Technology, Inc. [ Main Menu ] View Drive Assignments....[ 1 ] Define LD..........[ 2 ] Define LD..........[ 3 ] System is going to REBOOT! Controller Configuration....[ 4 ] Are You Sure? Y - Reboot / Any Key - Back...
-
Page 62: Installing The Raid Drivers
Installing the RAID Drivers Your system may come with a Windows install CD that already includes AMD RAID drivers. If so, then this section is not relevant. If that is not the case (or you are trying to install a new version of Windows), then you will need an AMD RAID driver F6 install floppy. - Page 63 The following Windows Setup screen appears: Windows Setup --------- You have chosen to configure a SCSI Adapter for use with windows£¬ using a device support disk provided bu an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen.
- Page 64 Memo AMD RAID Configuration...
-
Page 65: Ati Crossfire Tm Technology Support
Chapter 6 ATI CrossFireX Technology Support This motherboard supports the ATI CrossFireX Technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section. Requirements Two or three identical CrossFireX ready graphic cards are needed for the setup of 2-way / 3-way CrossFireX configuration. - Page 66 B. For 3-way configuration, two CrossFire Bridges are needed to connect the three graphic cards. 3. Connect the cable from your monitors to the CrossFireX ready graphics card installed on the PCIEX16_1 slot. Monitor Cable * For reference only Monitor Cable * For reference only 4.
-
Page 67: The Catalyst Tm Control Center Dialog Box
The Catalyst Control Center Dialog Box To enable CrossFireX • Install ATI graphic card driver. • Enter the Catalyst Control Center Dialog Box. • check the “Enable CrossFireX ” item. • Click OK to apply. ATI CrossFire Technology Support... - Page 68 Memo ATI CrossFire Technology Support...
-
Page 69: Trouble Shooting
Chapter 7 Trouble Shooting Start up problems during assembly After assembling the PC for the first time you may experience some start up problems. Before calling for technical support or returning for warranty, this chapter may help to address some of the common questions using some basic troubleshooting tips. -
Page 70: Start Up Problems After Prolong Use
2. From the BIOS setting, try to disable the Smartfan function to let the fan run at default speed. Doing a Load Optimised Default will also disable the Smartfan. Start up problems after prolong use After a prolong period of use your PC may experience start up problems again. This may be caused by breakdown of devices connected to the motherboard such as HDD, CPU fan, etc. - Page 72 Memo Trouble Shooting...
-
Page 73: Post Code Checkpoints
POST Code Checkpoints The POST code checkpoints are the largest set of checkpoints during the BIOS pre-boot process. The following table describes the type of checkpoints that may occur during the POST portion of the BIOS : Checkpoint Description 01-0F SEC Status Codes &... - Page 74 CPU post-memory initialization. Boot Strap Processor (BSP) selection CPU post-memory initialization. System Management Mode (SMM) initialization Post-Memory North Bridge initialization is started Post-Memory North Bridge initialization (North Bridge module specific) Post-Memory North Bridge initialization (North Bridge module specific) Post-Memory North Bridge initialization (North Bridge module specific) Post-Memory South Bridge initialization is started Post-Memory South Bridge initialization (South Bridge module specific) Post-Memory South Bridge initialization (South Bridge module specific)
- Page 75 FB-FF Reserved for future AMI error codes Memory not Installed Memory was installed twice (InstallPeiMemory routine in PEI Core called twice) Recovery started DXEIPL was not found DXE Core Firmware Volume was not found Reset PPI is not available Recovery failed S3 Resume failed DXE Core is started NVRAM initialization...
- Page 76 9E-9F Reserved for future AMI codes IDE initialization is started IDE Reset IDE Detect IDE Enable SCSI initialization is started SCSI Reset SCSI Detect SCSI Enable Setup Verifying Password Start of Setup Reserved for ASL (see ASL Status Codes section below) Setup Input Wait Reserved for ASL (see ASL Status Codes section below) Ready To Boot event...
Need help?
Do you have a question about the A990FXM-A and is the answer not in the manual?
Questions and answers