Power Management Setup - ECS A990FXM-A Manual

34

Power Management Setup

This page sets up some parameters for system power management operation.
Main Advanced
Power Management Setup
Resume By PME
Resume By USB2.0 (S3)
Resume By PS2 KB (S3)
Resume By PS2 MS (S3)
EUP Function
Power LED Type
Resume By PME (Disabled)
These items specify whether the system will be awakened from power saving modes
when activity or input signal of the specified hardware peripheral or component is
detected.
Resume By USB2.0 (S3) (Disabled)
This item allows you to enable/disable the USB2.0 device wakeup function from S3
mode.
Resume By PS2 KB (S3) (Disabled)
This item enables or disables you to allow PS2 keyboard activity to awaken the
system from power saving mode.
Resume By PS2 MS (S3) (Disabled)
This item enables or disables you to allow PS2 mouse activity to awaken the system
from power saving mode.
EUP Support (Enabled)
This item allows user to enable or disable EUP support.
Power LED Type (Dual Color LED)
This item enables you to set Power LED type.
Press <Esc> to return to the Advanced Menu page.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Chipset M.I.B X Boot
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Dual Color LED]
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Using BIOS
Security Save & Exit
About Resume by
PCI/PCI-E/Lan/Ext. USB3.0 PME
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
:Select Screen