Sata Configuration - ECS A990FXM-A Manual

SATA Configuration

Use this item to show the mode of serial-ATA configuration options.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset
SATA Configuration
Serial-ATA Controller
SATA Mode
PATA Controller
eSATA 6Gb/s Controller Mode
SATA Port1
SATA Port2
SATA Port3
SATA Port4
SATA Port5
SATA Port6
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Serial-ATA Controller (Enabled)
This item allows you to enable or disable the onboard SATA controller.
SATA Mode (IDE Mode)
Use this item to select SATA mode.
PATA Controller (Enabled)
Use this item to enable or disable the PATA device.
eSATA 6Gb/s Controller Mode (AHCI Mode)
Use this item to select eSATA mode.
SATA Port 1~6 (Not Present)
This motherboard supports six SATA channel and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel.
Press <Esc> to return to the Advanced Menu page.
M.I.B X Boot Security
[Enabled]
[IDE Mode]
[Enabled]
[AHCI Mode]
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Using BIOS
Save & Exit
Enabled/Disabled SATA
Contreller
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
37