ECS A990FXM-A Manual page 45

AltVid (0)
This item specifies the VID driven to the VDD power plane(s) while in the low
power state 0:24N:3xDC[6:0].
Slam Time Mode (Auto)
This item enables you to set slam time mode, this option is only for RB-C3, BL-
C3, DA-C3.
VSSlamTime (Auto)
This item specifies the time to wait for voltage stabilization during altvid transitions
if a new VID is provided to the voltage regulator without ramping. 0:24N:3xDC
[31:29]
Press <Esc> to return to the M.I.B X Menu page.
Memory Control
Scroll to this item and press <Enter> to view the following screen:
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset
Memory Control
Memory Clock DCT0 is:
Memory Clock DCT1 is:
Memory Clock Mode
Memclock Value
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Memory Clock DCT0 is (None)
This item shows current memory clock of DCT0.
Memory Clock DCT1 is (DDR-1333/667MHz)
This item shows current memory clock of DCT1.
Memory Clock Mode (Specific)
This item allows user to set the memory clock mode.
Memclock Value (DDR-1333(667MHz))
This item allows user to set the memclock value.
M.I.B X Boot Security
None
(DDR-1333/667MHz)
[Auto]
[DDR 1333(667MHz)]
Using BIOS
Save & Exit
Set Memclock Value.
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
41