Boot Menu - ECS A990FXM-A Manual

44

Boot Menu

This page enables you to set the keyboard NumLock state and Boot device priority.
Main Advanced
Boot Configuration
Bootup Numlock State
Quiet Boot
Set Boot Priority
1st Boot
2nd Boot
3rd Boot
4thBoot
5th Boot
6th Boot
7th Boot
8th Boot
Bootup NumLock State (On)
This item determines if the NumLock key is active or inactive at system start-up
time.
Quiet Boot (Enabled)
If enabled, BIOS will show a full screen logo at boot, if disabled, BIOS will set the
initial display mode to BIOS and show the diagnostic POST screen at boot.
1st/2nd/3rd/4th/5th/6th/7th/8th Boot (CD/DVD /Hard Disk /USB Floppy /USB
CD/DVD /USB Hard Disk /USB KEY /Network /UEFI)
Use these items to determine the device order the computer used to look for an
operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Chipset M.I.B X Boot
[On]
[Enabled]
[CD/DVD]
[Hard Disk]
[USB Floppy]
[USB CD/DVD]
[USB Hard Disk]
[USB KEY]
[Network]
[UEFI]
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Using BIOS
Security Save & Exit
Select the keyboard Numlock
state
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
:Select Screen