Checking Jumper Settings - ECS A990FXM-A Manual

Checking Jumper Settings

The following illustration shows the location of the motherboard jumpers. Pin 1 is
labeled.
Name Type
CLR_CMOS
3-pin
To avoid the system unstability after clearing CMOS, we recommend
users to enter the main BIOS setting page to "Load Default Settings"
and then "Save Changes and Exit".
Description
1-2: NORMAL
2-3: CLEAR
Clear CMOS
Before clearing the
CMOS, make sure to
turn off the system.
Installing the Motherboard
Setting (default)
1 2 3
CLR_CMOS
11