Table of Contents
Advertisement
Voq User Guide
Start > Settings > More > Data
Press
Connections
Caution
: If you set the
to a specific GPRS connection (rather than to
Automatic
), the phone uses this GPRS connection
even when it is connected to your desktop PC
through the cradle or a sync cable. In other words,
data always travels over the air. This could result in
higher charges from your service provider.
As a general rule, leave the
Internet connection field set
Automatic
to
By default, VoqMail 1.0 uses a fixed GPRS connection
Automatic
but will use
in future releases.
Note
Idle disconnect after
: Always leave the
None
Start > Settings > Data
set to
. (See
Connections > Menu > Options
94
Internet connection
field
.
field
.)
Dial-up connections
You can create a dial-up connection to connect
remotely to the Internet, a Wireless Application Protocol
(WAP) network, or your company network.
When you open a program that is configured to use this
connection, your phone connects automatically. For
example, you can create a connection to the Internet
and then configure Internet Explorer to use it.
Create a dial-up connection
1
Start > Settings > More > Data
Press
Connections > Menu > Edit Connections >
Dial-up Connections > Menu > Add
2
Enter the requested information as follows and
Done
then press
:
·
Description
–enter a name for the
connection.
·
Connects to
–scroll to the network.
·
Phone number
–enter the phone number you
use to dial the network.
·
User name
–enter your network user name.
·
Password
–enter your password.
·
Domain
–enter the domain name, if required.
Note
: If you are not sure about the information to
enter, ask your network administrator.
Tip
: If you subscribe to General Packet Radio Services
(GPRS), you can set up a GPRS connection to access
.
2130324
Advertisement
Table of Contents
