Install The Battery; Charge The Battery - Sierra Wireless Voq Quick Reference

2

Install the battery

You cannot operate the phone without the battery even
if the phone is attached to the AC adapter.
1
Insert the battery, bottom end first, into the
opening on the back of the phone.
2
Lower the battery to the phone. Press the top of
the battery until it clicks into place.
To remove the battery:
1
Slide and hold the locking latch open.
2
With the latch open, pull the top of the battery
away from the phone and lift out the battery.
Note
: Always turn off the phone using the Power
button before you remove the battery. Otherwise you
may lose e-mails and other data.
Rev. 1.2 Apr. 04
3

Charge the battery

Charge the battery for a minimum of 12 hours the first
time. You can use the phone while the battery is
charging. If the battery is totally discharged when you
plug in the AC adapter, it takes several minutes for the
phone to start up. This is normal and ensures that the
phone has sufficient power for reliable operation.
1
Plug the lead from the AC adapter into the bottom
of the phone.
2
Insert the AC adapter plug into a power outlet. If
required, use the plug adapter for your country.
If you ordered the Premium Accessory Kit, you can also
use the cradle to charge the battery. See
4
Set the correct date and time
This is crucial to the proper running of many programs.
On the Home screen, press
> Date and Time
. (Press any key to change AM/PM.)
Getting Started
page 125.
Start > Settings > More
9