Using The Desktop Cradle - Sierra Wireless Voq Quick Reference

Table of Contents

Advertisement

Using the desktop cradle

Warning!
Use of any AC adapter other than the
one supplied with the Voq phone or a Voq
accessory kit, voids the Voq warranty.
The optional desktop cradle includes a separate sync
cable and an AC adpter kit that allows you to
synchronize and charge your phone without connecting
or disconnecting any wires. With the phone in the
cradle, you can still make calls using a headset or the
speakerphone. However, you cannot use the
thumbpad.
The cradle has a second rear slot to charge a spare
battery in addition to the phone.
Recharge times:
Phone - 2 hours
Spare battery in slot - 5 hours
Rev. 1.2 Apr. 04
To set up the cradle for the first time:
Note
directly into the bottom of the phone if you wish.
Docking the phone
Note
charge it for a minimum of 12 hours.
To dock your phone in the cradle:
Rear slot for
spare battery.
1
Remove the cradle components from the
packaging.
2
Attach the cradle.
a Plug the sync cable USB connector into a USB
port on the PC.
b Plug the other end of the cable into the back of
the cradle.
3
Attach the AC adapter.
a Plug the lead from the AC adapter into the
back of the cradle.
b Plug the AC adapter into an electrical wall out-
let. If necessary, use a plug adapter for your
region.
: You can plug the AC adapter from the cradle
: If you are charging a battery for the first time,
1
Tilt the phone towards you as you lower it into the
cradle.
2
Once the connectors meet, tilt or rock the phone
towards the back of the cradle. The white light at
the front of the cradle indicates that the phone is
seated properly.
Voq Accessories
125

Advertisement

Table of Contents
loading

Table of Contents