lehman Trikes Raider XL 2014+ Installation Instructions Manual page 6

1. See Fig. 1. Cut crossover pipe even with end
of front head pipe as shown.
2. See Fig. 2. Install steel plug with high temp
silicone into remaining crossover section on
front head pipe. Secure with clamp as shown.
•
(1) Steel plug– S002210
•
(1) Clamp– S001600
3. See Fig. 3. Cut rear head pipe in front of cross-
over pipe weld as shown. Discard crossover
pipe
EXHAUST MODIFICATION
Install plug
and clamp
6
Fig. 1
Cut crossover pipe here
Front head pipe
Fig. 2
Front head pipe
Fig. 3
Cut rear head pipe here
Rear head pipe
2014+ XL Raider