Park Brake Assembly
1. See Fig. 1. Install park brake cables to caliper
brackets. Secure cable to bracket with cir-clip
provided on cables.
2. See Fig. 2. Attach park brake bracket with RH
body mount bracket to trike using original foot
peg mounting holes using the following hard-
ware. Body mount will go on outside of park
brake bracket. Spacers will go over bolts on
inside of bracket. Torque to 33 ft. lbs.
•
(1) Park Brake Bracket– LB6412
•
(1) RH Body Mount– LB6408
•
(2) Short Spacers– LS6404
•
(2) 3/8" x 2" Bolt– CB1255
•
(2) 3/8" Flat Washers– CW2015
3. See Fig. 3. LH body mount will use longer
spacers with the following hardware. Brake
line clamp will be installed on lower bolt.
•
(1) LH Body Mount– LB6407
•
(2) Long Spacers– LS6405
•
(2) 3/8" x 2" Bolt– CB1255
•
(2) 3/8" Flat Washers– CW2015
•
(1) Brake Line Clamp– GC0112
PARK BRAKE INSTALLATION
RH body mount bracket
Park brake bracket
18
Fig. 1
Fig. 2
Short spacers
Fig. 3
LH body mount bracket
Brake line clamp
2014+ XL Raider