5. See Figs. 3 & 4. Install brake lines to calipers
with the following hardware. Torque banjo
bolts to 16 ft. lbs.
•
(1) M10 Banjo Bolt– CB6001
•
(2) Banjo Washer– GC6002
6. See Figs. 3 & 4. Secure brake lines to swin-
garm with brake line routing clips in swingarm.
Secure to differential with cable tie as shown.
•
(4) Brake Line Clip- S001650
•
(2) Cable Tie– CT1036
WARNING: Use correct DOT-rated brake fluid
7. Fill brake system with fluid. Bleed rear brake
system with bleed screws at calipers and check
for leaks.
BRAKE INSTALLATION
17
Fig. 3
Clips
Cable Tie
Fig. 4
Clips
Cable Tie
2014+ XL Raider