Advertisement
1. Install reflectors to body.
•
(4) Reflectors– S001045
2. See Fig. 1. Two red reflectors will be cen-
tered on side of fenders and a 1/4" up from
edge. They should be located directly
above wheel center cap on body.
3. Last two red reflectors will be centered 3"
below rear taillights on body.
4. Install Lehman and Raider badges to body
as shown.
•
(1) Lehman Badge– GB1327
•
(1) Raider Badge– GB1323
5. Install wheels. Torque wire wheel lug
nuts to 75 ft.-lbs. and aluminum wheel
lug nuts to 85 ft.-lbs.
CAUTION: Do not use an impact when in-
stalling lug nuts.
WARNING: Verify Bank Angle Setting has
been changed before operating trike.
FINAL ASSEMBLY
33
Fig. 1
Fig. 2
2014+ XL Raider
Advertisement
