Advertisement
EXHAUST SYSTEM INSTALLATION
4. See Fig. 3. Install mufflers to bracket using
original mounting hardware.
5. Install Lehman pipes into H-D mufflers. Short
pipe will go on RH muffler (rear head pipe) and
long pipe will go on LH muffler (front head
pipe).
•
(1) Short RH Exhaust Pipe-LP6406
•
(1) Long LH Exhaust Pipe– LP6407
6. Use Loctite high temp silicone or equivalent in
pipe where it slides over H-D head pipe.
7. See Fig. 4. Place exhaust clamps onto exhaust
pipes. Install Lehman pipes over H-D head
pipes.
•
(2) Exhaust Clamps– GC1015
8. Leave all exhaust pipes and brackets loose.
Exhaust will be completed once body has been
installed on trike.
9. See Fig. 5. Install RH body/exhaust bracket to
outside of RH H-D frame rail using the following
hardware.
•
(1) RH Body/Exhaust Bracket-LB6422
•
(1) 5/16" x 1-1/2" Bolt– CB1170
•
(2) 5/16" Flat Washers– CW2010
•
(1) 5/16" Lock Nuts– CN3045
Install extension
pipes to head pipes
Exhaust Bracket
21
Fig. 3
Fig. 4
Fig. 5
RH frame rail
Front of bike
2014+ XL Raider
Advertisement
