Preliminary Tool - AOpen XC CubeAV User Manual

5.2 Preliminary Tool

"A workman must first sharpen his tools if he is to do his work well". Right before you
start the assembly, there are some tools that can't be spared.
Firstly, the most frequently-used too is cross screwdriver by which most interior
components are fixed. A suitable screwdriver can make the following job much easier.
Being so, does any screwdriver apply? Actually a magnetic tip one is suggested. That is
because in the process of setting up your PC, the situation is very likely to happen: you
accidentally drop the screws into the interior of the computer. In case of this, a magnetic
screwdriver helps attracting the fallen screws that are hard to reach by hands. Some
screw holes are placed where hands can hardly reach. At this time, we need a magnetic
screwdriver, too.
I can get it done!!
When putting things together, it is necessary to adjust Jumper. In most cases, things
can be done barehanded. But there comes a time always when your hands fail to reach in
and fix the problem. A pair of pliers keeps you away from any annoying trouble for just
setting one JUMPER.
What is Jumper?
Jumper is something that utilizes the
short circuit of the pins to tune up
some functions, such as FSB (front
side bus), ratio, and sound switches
adjusting.
92