Fluke LinkRunner Pro Quick Reference Manual page 9

Cable test unit selection screen
Select the cable length units as either feet or meters. Use the right arrow key to
toggle units and the center button to save.
LinkRunner IP address
Allows user to configure DHCP or use manual IP, Mask, and Router addresses. To
manually enter the IP address, uncheck DHCP using the left/right arrow keys to check
and uncheck the check box. Then, using the down arrow key, move down to the IP
address. Press the selection button (center). Move right to each digit (by using the
right arrow key) and use the up/down arrow keys to select each digit value. Keep
doing this until the IP address is entered. Press the center button to save the
information. Use the same procedure as above to edit the Mask and Router
information.
Ping IP address entry
Allows you to enter up to 10 PING IP addresses. When you enter the PING screen, each
address will get pinged. You may also use the LinkRunner Connect PC application to
enter the IP addresses, then using the supplied USB cable, download the IP addresses
to LinkRunner Pro.
Selecting the IP number/name to edit: When
button (center). Use the up/down arrow keys to choose the IP number and the
selection button to select it. Notice at the bottom of the display, the IP name changes
as you scroll thru the 10 IP numbers. By default the names are IP1 – IP10.
Editing the IP address to PING: Then, using the down arrow key, move down to the IP
address. Press the selection button (center). To enter an IP address, move right to each
digit (by using the right arrow key) and use the up/down arrow keys to select each
digit value. Keep doing this until the IP address is entered, then press the selection
button to save.
Editing the IP name: Press the down arrow key to move the cursor to the IP name
field. Press the selection button (center). To enter an IP name, move right to each
character (by using the right arrow key) and use the up/down arrow keys to select
each character. Keep doing this until the IP name is entered and then press the
selection button.
To exit out of the PING IP address configuration, press the left arrow key.
is highlighted, press the selection