Specifications - Makita HR4001C Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
Intended use
The tool is intended for hammer drilling in brick, concrete
and stone as well as for chiselling work.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model HR4001C
Sound pressure level (L
Sound power level (L
Model
Carbide-tipped bit
Core bit
-1
)
Overall length
Net weight
Safety class
equipment and
) : 92 dB(A)
pA
) : 103 dB(A)
WA
HR4001C
6.3 kg
END201-5
Uncertainty (K) : 3 dB(A)
Model HR4010C,HR4011C
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
its
Model HR4001C
Work mode : chiselling
Vibration emission (a
Uncertainty (K) : 2.0 m/s
Work mode : chiselling function with side grip
Vibration emission (a
ENE044-1
Uncertainty (K) : 2.5 m/s
Work mode : hammer drilling into concrete
Vibration emission (a
ENF002-2
Uncertainty (K) : 1.5 m/s
Model HR4010C
Work mode : chiselling
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENG905-1
Work mode : chiselling function with side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
2
HR4010C
40 mm
105 mm
235 - 480
1,350 - 2,750
468 mm
6.7 kg
/II
) : 90 dB(A)
pA
) : 101 dB(A)
WA
Wear ear protection
) : 10.5 m/s
h,CHeq
2
) : 10.0 m/s
h,CHeq
2
) : 12.5 m/s
h,HD
2
) : 7.0 m/s
h,CHeq
2
) : 8.0 m/s
h,CHeq
2
2
) : 9.0 m/s
h,HD
2
HR4011C
6.7 kg
ENG900-1
2
2
2
2
2