Fuel / Water Hose Routing - Suzuki DF 40 Service Manual

10-7 WIRE / HOSE ROUTING

FUEL / WATER HOSE ROUTING

• Do not over-bend (kink) or twist hoses when installing.
• When installing hose clips, position tabs to avoid contact with other parts.
• Check that hoses do not contact rods and levers during either engine operation or standstill.
• Extreme care should be taken not to cut, abrade or cause any other damage on hoses.
• Care should be taken not to cause hoses to be compressed excessively by any clamp when fitted.
Clamp
Breather hose
Water return hose
Fuel hose / Protector
(Fuel filter to Low fuel pump)
Fuel filter
High pressure fuel filter
Evaporation hose / Protector
(Vapor separator to flywheel cover)
Fuel hose / Protector
(Low fuel pump to vapor separator)
Breather hose
Clamp
Water hose (Engine holder to 3-way)
Water hose (Engine holder to vapor separator)
Pilot water hole
Vapor separator
Fuel hose
.
(Vapor separator to H fuel filter)
Fuel hose / Protector
(fuel connector to fuel filter)