Removal / Installation - Suzuki DF 40 Service Manual

REMOVAL / INSTALLATION

System construction
REMOVAL
Prior to removing electrical parts :
• Disconnect battery cables from battery.
Battery charge coil
• Remove flywheel. (See page 3-48.)
• Remove three screws securing the battery charge coil.
• Disconnect battery charge coil lead wire connector from rec-
tifier & regulator.
Rectifier & regulator
• Remove two bolts securing the Rectifier & regulator.
• Disconnect lead wire connectors.
200 N . m
(20.0 kg-m, 145 Ib.-ft.)
ELECTRICAL 4-4
Bolt (1)
Washer (1)
Key (1)
Flywheel (1)
Battery charge coil (1)
Screw (3)
Rectifier & regulator (1)
Bolt (2)
Fuse case (1)
30A fuse (1)