Cleaning And Maintenance - Russell Hobbs RHB315 Instructions And Warranty

CLEANING AND MAINTENANCE


This appliance is for household use only and is not user-serviceable.

Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.

Always remember to unplug the unit from the electrical outlet when not in use and
before cleaning.

Do not use bleach or other abrasive substance or solvents to clean your appliance as
it can be damaging to the finish.

Do not immerse the whole unit in water or any other liquid, or hold it under a running
tap to clean.

Unplug the blender from the mains before cleaning and storing away.

Clean soon after use, to prevent residues settling inside the jug.

Remove the jug from the motor unit. Wash the jug, lid and measuring cup in warm
soapy water, rinse well, then turn the jug upside down to drain and dry.

Keep hands out of the jug – BLADES ARE VERY SHARP.

If it is left for too long without cleaning and bits have glued themselves to the
inside of the jug, use a nylon brush to remove. If this does not work – crush a few
ice cubes in it.

Wipe the outside of the motor unit with a clean damp cloth.

Do not put the motor unit in water or any other liquid.
Quick clean of the glass jug -
Empty the glass jug and fill it with water. Place the glass jug on the motor and turn the
switch several times to the 'M' setting. Empty the glass jug and rinse until clean.
Thorough cleaning of the dismantled glass jug -
Ensure that the glass jug is completely empty before you unscrew the blade assembly. Be
careful when handling the blade. All removable parts are suitable for the dishwasher.
Note that the dishwasher can affect the surface finishes. Do not use harsh or abrasive
cleaning agents or solvents.