Russell Hobbs RHB315 Instructions And Warranty page 4

Do not run the motor for more than 2 minutes, either continuously, or using
25.
the pulse setting, otherwise it may overheat. After 2 minutes use, switch it off
for at least 2 minutes allowing it to cool to room temperature and allowing it
recover.
Do not use the blender for any purpose other than those described in these
26.
instructions.
Do not run the blender empty, as it may overheat.
27.
Do not operate the blender after it malfunctions. If the mains lead or plug is
28.
damaged, return the blender to the manufacturer in order to avoid any
hazard.
Children should be supervised to ensure that they do not play with the appliance.
29.
Always turn the power off at the power outlet before you remove the plug.
30.
Remove by grasping the plug. Do not pull on the electrical cord.
This appliance is designed for processing household quantities; it is not
31.
suitable for commercial purposes. Use the appliance only for the purpose it
was designed for.
Do not use this appliance if it or parts of it show visible damage or if the
32.
appliance has been dropped.
Do not attempt to make any modifications to this appliance.
33.
To avoid any risk and to remain within warranty, repairs to this appliance
34.
must be carried out by an authorised service agent only.
To reduce the risk of injury, never place the blade assembly on the base
35.
without the jar properly attached.
If the supply cord is damaged, it must be replaced by the manufacturer, its
36.
authorised service agent or similarly qualified persons in order to avoid any
hazard.
Switch off the appliance and disconnect from the power supply before
37.
changing accessories or approaching parts that move when in use.
Use only accessories provided by the manufacturer for this appliance.
38.
Do not run this appliance with an external timer or remote control system.
39.