Cleaning And Maintenance - Russell Hobbs RHFP62 Instructions Manual


Pulse function
 With the pulse operation, the appliance runs at the highest speed.

Feeding tube
 Correct supply of the foods through the feeding tube is very important.
 Cut the prepared foods a little smaller if necessary, so that they pass easily
through the filling inlet.
 Add the items for filling as vertically as possible simultaneously in the filling inlet.
 Compress the items evenly with the stopper. The degree of pressure influences
the concentration of the cut food.
Only use the pusher for further additions. Never reach in the feed tube with ones fingers.
Note: There is always a little unprocessed food remaining between the pusher and the
holding disc.

CLEANING AND MAINTENANCE


This appliance is for household use only and is not user-serviceable.

Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.

Always remember to unplug the unit from the electrical outlet when not in use
and before cleaning. Ensure that the speed control is set to "0".

It is much easier to clean the accessories directly after they have been used.
Wash them in warm, soapy water, rinse and dry well.

The body of the appliance and the stand should be cleaned with a damp cloth.
Do not let water enter the appliance or the stand.

Do not use bleach or other abrasive substance or solvents to clean your
appliance as it can be damaging to the finish.

To remove stubborn spots/marks, wipe the surfaces with a cloth slightly
dampened in soapy water or mild non-abrasive cleaner. Rinse and dry a clean,
dry, soft cloth.
10