Sw2/Sw6 Setting - TMT Automation Boxer 300 User Manual

3.6 SW2/SW6 SETTING:

OFF
1
SW2
2
ON
3
4
5
6
OFF
Default
1 – ON Ph1
Photocell-1
2 – ON Ph2
Photocell-2
SW6 3 – ON Stop
4 – ON Remote
5 – ON Remote
6 – ON None
Default
2/4 Channel
SW2
ON
Transmitter
2/4 Channel
SW2
OFF
Transmitter
4. TECHNICAL CHARACTERISTICS:
4.1 TECHANICAL DATA SHEET OF BOXER SERIES
Motor
Gear type
Peak thrust
Nominal thrust
Engine RPM
Absorbed Power
Power supply
Nominal input power
Maximum gate weight
Maximum gate length
Maximum operating current
Operating Temperature
Dimension LxWxH mm.
Weight
Speed
10
ON
Ph1
Ph2
Stop
D
C
SW6
Device
Switch to ON if Ph1 is not connected; Otherwise,
switch to OFF if Ph1 is connected
Switch to ON if Ph2 is not connected; Otherwise,
switch to OFF if Ph2 is connected
Switch to ON if "Stop (12)" is not connected; Otherwise,
switch to OFF if "Stop" is connected to any device
Setting with SW2
Setting with SW2
No function
Device Description (coordinate with remote)
ON, Button B is pedestrian mode
If connected with external device (EXT+/EXT-; 1/2)
SW6 4-ON; Button C on the remote can operation the device
If connected with external device (EXT+/EXT-; 1/2)
SW6 5-ON; Button D on the remote can operation the device
OFF Button B can operation the external device
(EXT+/EXT-; 1/2)
OFF SW6 4-ON; Button C is pedestrian mode;
Button D no function
OFF SW6 5-ON; Button D is pedestrian mode;
Button C no function
Description
Boxer 500
Worm Gear
5500N
5000N
3800 RPM
60W
24 Vdc
3A
500kg
6 Meters
5.5A for Maximum 10 secs
o
-20 C~+50
250 X 170 X 265
8 kg
21.9 cm / sec
BOXER SERIES SLIDING GATE OPENER USER MANUAL
Remark
1 & 2 must switch to ON
if Ph1 & Ph2 are not
connected to any devices
Remark
With external device:
SW6 4 - ON/OFF >
Button C - ON/OFF;
SW6 5 - ON/OFF >
Button D - ON/OFF;
If using a 2-channel
remote and require the
Button B to operation
the external device
switch the SW2 to OFF
o
C