Related Manuals for TMT Automation BOXER500E
Summary of Contents for TMT Automation BOXER500E
- Page 1 BOXER500E / BOXER800E SLIDING GATE OPENERS 24V DC MOTOR FOR RESIDENTIAL USER MANUAL...
- Page 3 4.3 R1 TRANSMITTER DATA SHEET P.11 4.4 FL2 FLASHING LIGHT DATA SHEET P.11 5. ADDITIONAL INFORMATION P.12 5.1 WIRE CONNECTION OF H2 PHOTOCELL (SAFETY BEAM) P.12 5.2 GREEN BOX INSTALLATION GUIDE P.13 INSTRUCTIONS BOXER500E / BOXER800E SLIDING GATE OPENER USER MANUAL...
- Page 4 (11) Only command the remote when you have a full view of the gate. TMT AUTOMATION INC. shall not be liable for any injury, damage, or any claim to any person or property which may result from improper use or installation of this system.
- Page 5 2.2 DESCRIPTION OF DEVICE a. Operation gear e. Release device b. Limit switch device f. Control panel c. 24Vdc motor g. Terminals of devices d. Back-up batteries (Optional) h. Green Box (Optional) INSTRUCTIONS BOXER500E / BOXER800E SLIDING GATE OPENER USER MANUAL...
- Page 6 2.3 DIMENSTION OF DEVICE 2.4 INSTALLATION OF MOTOR GEAR AND GEAR RACK INSTRUCTIONS BOXER500E / BOXER800E SLIDING GATE OPENER USER MANUAL...
- Page 7 Step2. Insert the key and turn clockwise to unlock the device Step3. Turn counter-clockwise of the bar to release the motor To restore the automation, simply reverse the above procedure. Step2 Step1 Step3 Step4 Step5 Step6 Step7 INSTRUCTIONS BOXER500E / BOXER800E SLIDING GATE OPENER USER MANUAL...
-
Page 8: Setup And Function Setting
If the LED display is in normal performing refer to “4.2.1”, you can control the gate by either transmitters or the button on the board: “UP”-clockwise moving, “SET”- stop and “DOWN”- Counterclockwise moving. PB1, KS1=: LED2 LED1 Green Box Antenna INSTRUCTIONS BOXER500E / BOXER800E SLIDING GATE OPENER USER MANUAL... - Page 9 If this reading increase instantly or stay in high reading, please check if any object in between of the gate moving area, and contact your installer for inspection. INSTRUCTIONS BOXER500E / BOXER800E SLIDING GATE OPENER USER MANUAL...
-
Page 10: Programmable Function Settings
1. The factory setting is “6-4” (% full speed) Over current setting 1. The function can adjust the running force of motor to be compatible with the gate weight. 2. The factory setting is "7-5". INSTRUCTIONS BOXER500E / BOXER800E SLIDING GATE OPENER USER MANUAL... - Page 11 1. The factory setting is "J-0". Open Photocell test function Close 1. The factory setting is "L-0". Open 2. If the function open Stop connector function Close 1. The factory setting is "P-1". Open 2. Stt INSTRUCTIONS BOXER500E / BOXER800E SLIDING GATE OPENER USER MANUAL...
-
Page 12: Testing And Checking
Descriptions LED1 Photocells LED1 will be on when the first pair of the photocells are activated. LED2 Photocells LED2 will be on when the second pair of the photocells are activated. INSTRUCTIONS BOXER500E / BOXER800E SLIDING GATE OPENER USER MANUAL... -
Page 13: H2 Photocell Data Sheet
Operating Temperature -20℃~+50℃ Dimension 71.5mm * 33mm * 14mm 4.4 FL2 FLASHING LIGHT DATA SHEET Application For outdoor use Installation Wall mounted vertically Operating Temperature -20℃~+50℃ Dimension 85mm * 60.5mm * 40.5mm INSTRUCTIONS BOXER500E / BOXER800E SLIDING GATE OPENER USER MANUAL... - Page 14 For optimal efficiency, the receiver and transmitter should be properly aligned. 4. Power-up the photocells and make sure the LED light on receiver and transmitter are ON. Step 1 Step 2 Step 3 Step 4 INSTRUCTIONS BOXER500E / BOXER800E SLIDING GATE OPENER USER MANUAL...
- Page 15 Gate opener start the operation, red LED light and power saving mode will turn off. CAUTION: In case of loop or installation of photocell which need power consumption anytime, please do not install Green Box. INSTRUCTIONS BOXER500E / BOXER800E SLIDING GATE OPENER USER MANUAL...
- Page 16 Solid material apply Manual release device Worm gear application Easy installation for great safety with lasting usage with easy use and give silence operation and user friendly highly protection interface INSTRUCTIONS BOXER500E / BOXER800E SLIDING GATE OPENER USER MANUAL 34100-XXXX...
Need help?
Do you have a question about the BOXER500E and is the answer not in the manual?
Questions and answers