Chevrolet 2015 Captiva Owner's Manual page 68

3-26 Seats and Restraints
1. Select one of the rear outboard
seating positions for installation
of the child restraint.
2. Locate the two lower anchor
positions.
The location of each lower
anchor is identified with a
circular marking on the lower
edge of the rear seat-back.
3. Make sure there are no foreign
objects around lower anchors,
including seat belt buckles or
seat belts. Foreign objects can
interfere with the proper latching
of the child restraint to the
anchors.
4. Place the child restraint on the
seat over the two lower anchors
and attach it to the anchors
following the instructions
supplied with the child restraint.
5. Adjust and tighten the child
restraint according to the
instructions supplied with the
child restraint.
Caution
Unused child restraint system
could move forward.
Remove child restraint system if
not in use, or secure it with
seat belt.
Since a seat belt or child
restraint system can become very
hot if it is left in a closed vehicle, be
sure and check the seat cover and
buckles before placing a child there.
Warning
Use all ISOFIX low and top tether
anchorages for their designed
purpose only.
ISOFIX low and top tether
anchorages are designed only to
hold child restraints which come
equipped with low and top
anchorage attachments.
Do not use ISOFIX low and top
tether anchorages to hold adult
seat belts, harnesses, or other
items of equipment in your
vehicle.
Using ISOFIX low and top tether
anchorages to hold adult seat
belts, harnesses, or other items or
equipment in your vehicle will not
provide adequate protection in the
case of a collision and could
result in injuries or even death.