Chevrolet 2015 Captiva Owner's Manual page 309

Caution
Do not remove any of the nuts
until you have raised the wheel
off the ground.
3. Insert the jack handle and the
wheel wrench into the jack.
4. Rotate the wheel wrench
clockwise to raise the lift head
slightly.
5. Locate the jack according to the
figure below. There is a notch at
the front and rear of the vehicle
under the doors.
6. Place the jack vertically at the
front or the rear jacking notch
next to the wheel you plan to
change.
Vehicle Care
Caution
Do not attempt to raise vehicle
until the jack is in the proper
position, and secure both to the
vehicle and the ground.
7. Raise vehicle by rotating wheel
wrench or jack handle clockwise
until lifting head fits firmly into
appropriate notch and tyre is off
the ground about
1 inch (2.5 cm).
10-49