Automatic Engine Start/Stop - Chevrolet 2015 Captiva Owner's Manual

9-4 Driving and Operating
Automatic transmission: Move
the shift lever to P (Park) or
N (Neutral). The engine will not
start in any other position. To
restart the engine when the
vehicle is already moving, use
N (Neutral) only.
If the vehicle has the keyless
access system, your foot must
be on the brake pedal to start
the engine.
Diesel engine: Turn the ignition
control knob to the ON position
for preheating until K goes out.
Turn the ignition control knob to the
START position.
When the engine begins cranking,
let go of the ignition control knob, it
will return to the ON position.
If ignition control knob does not turn,
try pushing the knob in and turning
again.
If the transmitter is not in the vehicle
or something is interfering with the
transmitter, the Driver Information
Centre (DIC) in the middle of the
cluster will display ELECTRONIC
KEY NOT DETECTED.
Automatic Engine Start/
Stop Feature
Stop-Start System
The stop-start system helps to save
fuel and to reduce the exhaust
emission. The engine turns off
automatically when the vehicle is at
low speed or standstill.
The engine will restart automatically
as soon as the clutch is depressed.
Activation
The stop-start system is activated
as soon as ignition is ON.
Deactivation
Deactivate the stop-start system
manually by pressing the eco
button.
The deactivation is indicated by the
LED in the button going off.
Automatic Engine Stop
If the vehicle is at low speed or in
standstill, activate the automatic
engine stop as follows:
Shift the gear lever to N
Release the clutch pedal