Chevrolet 2015 Captiva Owner's Manual page 310

10-50 Vehicle Care
Caution
As the jack begins to raise the
vehicle, make sure jack is
properly placed so it will not slip.
Do not raise vehicle more
than is necessary to change wheel.
Warning
Never get under car or start or
run the engine while car is
supported by a jack.
Vehicle may slip off the jack
resulting in serious injury or
death.
8. Remove wheel nuts completely
by turning anti-clockwise.
9. Remove tyre and wheel.
10. Mount spare tyre on the
wheel hub.
Caution
Never use oil or grease on
wheel nuts.
Always use correct wheel nuts.
As soon as possible, take your
car to a repairer and have the
wheel nuts tightened according to
specifications.
If tightened incorrectly, the nuts
might come loose.
11. Reinstall the wheel nuts.
Tighten each nut by hand until
the wheel is held against
the hub.
12. Rotate wheel wrench or jack
handle anti-clockwise and
lower vehicle to the ground.
13. Tighten wheel nuts firmly to
92 lb-ft (125 Nm) in a diagonal
sequence. 1 2 3 4 5
(See fig. below)
Warning
Make sure to use the correct nuts
or bolts tightened to the proper
torque.
Incorrect wheel nuts or bolts or
improperly tightened wheel nuts
or bolts can cause the wheel to
come loose and even come off.
This could lead to an accident.