Bluetooth Audio - Chevrolet 2015 Captiva Owner's Manual

INT (Intro-Scan)
Press the Function button under
INT, then the infotainment system
plays back the first few second for
all tracks sequentially.
To cancel this function, press the
Function button under INT again.
iPod Navigation Function
(Only for Type 2)
iPod Navigation mode
Press the MENU button to choose
the supported category from the
iPod instrument.
Next/Previous Category
Press the SEEK buttons, and
then press the Function button
under ENT, then the infotainment
system start playback.
Cancel or Previous Step
Press the Function button under
then the infotainment system get
back to the previous step.

Bluetooth Audio

After Bluetooth connection
procedure. (refer to "Pairing
procedure")
A2DP mode
Press the Function button below
the AUDIO PLAY on the display.
PLAY
Press the Function button below
in the display to start playback
MP3 files of the connected handset.
Pause
Press the Function button below
in the display to pause playback
while MP3 file is playback.
Next/Previous Track
Press the Function button below
/ in the display, and then the MP3
file starts playback of the next/
,
previous track.
Infotainment System
Exterior Sound (AUX) Input
The infotainment system has one
auxiliary input jack (diameter
3.5mm) located on the lower right
side of the faceplate.
This is not an audio output; do not
plug the headphone set into the
front auxiliary input jack.
You can however, connect an
external audio device such as an
iPod, laptop computer, MP3 player,
CD changer, or XM
to the auxiliary input jack for use as
another source for audio listening.
AUX-In Mode Selection
Press the SOURCE [SRC] (only for
Type 2) or AUX (only for Type 1/3)
button in the other playback mode.
If the auxiliary jack doesn't detect
the presence of an output jack, the
aux mode will be prevented from
coming up.
7-19
receiver, etc.