Display - Panasonic BT-LH910G Operating Instructions Manual

Reference point
Channel

display

1 1
3 3
5 5
7 7
SDI1 1080/60i
20
0 dB point
Peak hold
Overrange
( : ) NDF
( . ) DF
A color skeleton bar meter indicates the audio
level for SDI signals and HDMI signals.
The display method of the audio level meter can
be set in the menu (page 49).
In 3D assist mode, the audio of the SDI1 (L) side
2 2
4 4
is indicated.
6 6
8 8
Green: Up to reference point (included)
Yellow: Reference point (not included) to 0 dB point
Red: Overrange
Use the menu to display the time code for HD-SDI
signal input. It also allows you to switch display
mode (VITC, LTC, VUB, LUB). (page 50)
Displays the time code in hours: minutes:
seconds: or frames.
In drop-frame mode, a different delimiter between
seconds and frames is used.
Note :
Read errors are displayed as "--:--:--:--"
BG8, BG7, BG6, BG5, BG4, BG3, BG2, BG1
appear in the stated order.
BG: binary group
The (:) delimiter does not appear.
Note :
Read errors are displayed as "--:--:--:--"