Panasonic BT-LH910G Operating Instructions Manual page 55

3D Assist Mode
This function is for checking the subject's position at a fixed screen position in order to determine the depth
position of the main subject.
Automatically or manually switch the SDI1 (L) image and SDI2 (R) image and then check the subject's position.
Operation
MODE
MANUAL
SPEED
This function overlays and displays the SDI1 (L) image and SDI2 (R) image on a checkerboard pattern in
one screen to enable you to check the brightness offset and color differences
Operation
SIZE
MANU L SLOW CONV
MODE MANUAL SPEED FUNC.
Description
MANU Selects the switching method of the L side image and R
AUTO side image.
<MANU> Manual switching <AUTO> Automatic switching
L Selects the image to display when the MODE menu is
R MANU.
<L> Image of L side
SLOW Selects the speed for when the MODE menu is auto
FAST switching.
<SLOW> Every 1 second
<FAST> Every 4 frames (When 720P: Every 8 frames)
128 COLR
SIZE FUNC.
Description
128 Selects the checkerboard grid size for when overlaying the
256 image of the L side and image of the R side.
<128> The checkerboard grid consists of squares of 128
<256> The checkerboard grid consists of squares of 256
Screen:
Normal display of one screen
<Assist Points>
The place at which the image does not change is
the convergence point.
If the camera adjustment (vertical or rotation
direction position adjustment) is correct, the image
at other than the convergence point will shift to
the left/right target.
The underlined values are factory preset setting values.
Screen:
Overlay L/R on one screen.
<Assist Point>
If it is easy to see the borderline of the checkerboard
pattern, the brightness or color of L/R images is
offset.
The underlined values are factory preset setting values.
samples and 128 lines.
samples and 256 lines.
<R> Image of R side
55