Panasonic BT-LH910G Operating Instructions Manual page 63

REMOTE Specifications
GAMMA SEL. STDIO/
PST
INPUT SEL. VIDEO
INPUT SEL. SDI1
INPUT SEL. SDI2
INPUT SEL. HDMI
INPUT SEL. YP P
B R
INPUT SEL. VF
INPUT SEL. INT SG
MONO
*
R-TALLY 3
*
G-TALLY 3
PIXEL TO PIXEL
FOCUS-IN-RED
REMOTE
* *
STANDBY 4 5
*
3
When "R-TALLY" and "G-TALLY" simultaneously go on, the tally color changes to orange.
*
4
When remote standby is set to ON, the CONT. and B.LIGHT LEDs on the front flash.
*
5
If the GPI terminal to be assigned is set to a short-circuited state first and then MENU is operated to set
this item, the backlight turns off and the screen display disappears, so MENU operation becomes unable
to be checked. To change the setting of this item, be sure to set it when the GPI terminal is in the open
state.
Restrictions
SD ASPECT does not operate when the input signal is HD.
The MARKER items do not operate when the input line of the signal is VF.
SD ASPECT, SCAN, WFM/VECTOR, MARKER, PIXEL TO PIXEL, and PIXEL POSITION do not operate
in SUB WINDOW mode.
SCAN and MARKER do not operate in PIXEL TO PIXEL mode.
GAMMA SELECT, SD ASPECT, SCAN, MARKER, and MONO do not operate when the input line of the
signal is HDMI and the signal format is 640 x 480.
When both "MARKER1" and "MARKER2" are activated at the same time, "MARKER1" has priority.
However, when the display aspect ratio is 4:3, the "MARKER1" aspect ratio is 16:9 and the "MARKER2"
aspect ratio is 4:3, "MARKER2" is displayed. In this case, the "MARKER2" background is controlled.
When "MARKER BACK HALF" and "MARKER BACK BLACK" are activated at the same time, "MARKER
BACK BLACK" has priority.
INPUT SEL. are prioritized in the order of "INPUT SEL. VIDEO," "INPUT SEL. SDI1," "INPUT SEL.
SDI2," "INPUT SEL. HDMI," "INPUT SEL. YP
When "GAMMA SEL. FILM" and "GAMMA SEL. STDIO/PST" are activated at the same time, "GAMMA
SEL. FILM" has priority.
Switches the gamma curve to STDIO/PST
mode.
Switches the input line to VIDEO.
Switches the input line to SDI1.
Switches the input line to SDI2.
Switches the input line to HDMI.
Switches the input line to YP
Switches the input line to VF.
Switches the input line to INT SG.
Switches between color and monochrome
(MONO).
Lights the red tally.
Lights the green tally.
Switches screen display between input
size and display size.
Displays the outlines of the subject that
are in focus in red
Sets remote standby (turns off the
backlight, and turns off the power of
devices that are not required).
B
Level operation (Short-circuited:
STDIO/ PST mode, Open:
STANDARD mode)
Edge operation
Edge operation
Edge operation
Edge operation
P . Edge operation
B R
Edge operation
Edge operation
Level operation (Short-circuited:
monochrome, Open: color)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
Level operation
(Short-circuited: ON, Open: OFF)
P ," "INPUT SEL. VF," and "INT SG."
R
63