Panasonic BT-LH910G Operating Instructions Manual page 46

When the "FOCUS-IN-RED" function is used, the section that is being focused is displayed in an easy-to-
understand red, making camera focus adjustments easy.
Each press of the button ("FUNCTION1" to "FUNCTION3" (page 38)) to which the "FOCUS-IN-RED" has
been assigned turns the function on and off.
This assumes that the "FOCUS-IN-RED" function has been assigned to any of the [FUNCTION1] to
[FUNCTION3] buttons.
When the "FOCUS-IN-RED" function is displayed, the detection sensitivity level (0 - 30) can be changed
with the F-IN-R knob. A higher numerical value results in lower detection sensitivity (outlines are displayed
in red even when they are not in focus properly).
If you set CHROMA to 0 or assign "MONO" to another function button to switch to monochrome, the focus
will become easier to check.
The foreground is
in focus
The background
is in focus
46
Normal screen
FOCUS-IN-RED display
Press the
The outlines in focus are displayed in red
Press the
These examples show 16:9 aspect ratio images.