Table of Contents
Advertisement
Some Vehicles have a special "COMFORT feature". When you lock the door with the key, you just have to
keep on turning the key on the door about 5 or 7 seconds and the window will close directly.
If your vehicle with "COMFORT feature" and you wish the door being locked and the window being closed
automatically at the same time by remote control, you can set the alarm feature II-1 "with comfort feature".
REMOTE START FEATURE PROGRAM MODE.
START FEATURE "
1. Turn the Ignition 'switch 'ON/OFF' 3 TIMES and stay in OFF position.
2. Push the Valet switch 8 times and holding in on the 8
hearing and the LED start to flash then release the valet switch. You are now in the Start feature 'I'
programming mode.
3. Press and release the transmitter button 'A' corresponding to the feature 'A' you want to program.
Press
One Chirp /
T
r
LED one pulse
ransmitte
Button
Factory
Setting
Gasoline Engine
1
10 minutes run time
2
Factory
3
disarm with channel
3 on
Constant
4
light output
+
5
Press
button
Remote Start.
+
The Vehicle without
6
Turbo Mode (The
system Can not be
Lock / Unlock with
the engine running.)
+
3 Hour Time start
7
Exit
: Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps & 3 parking light flashes to
confirm exit.
SAFE START (Child safety mode)
Factory defaults setting to press the
Programming this feature to eliminate an accidental remote start, when kids enter this transmitter, it
requires: The user presses the transmitter
START FEATURE "
1. Turn the Ignition 'switch 'ON/OFF' 3 TIMES and stay in OFF position.
2. Push the Valet switch 10 times and holding in on the 10
hearing and the LED start to flash then release the valet switch. You are now in the Start feature 'II'
programming mode.
3. Press and release the transmitter button 'A' corresponding to the feature 'A' you want to program.
Press
One Chirp /
T
r
LED one pulse
ransmitte
Button
Factory Default
Setting
Exit the programming mode. (3 long chirp & 3 parking light flashes to confirm this exit.)
1
+
Engine Checking
2
TACH.
VS 255 INSTALL
I
" PRORAMMING:
Two Chirps /
LED two pulse
Default
Diesel Engine and
10 seconds warn-up
timer
20 minutes run time
alarm
Without this feature
parking
Flashing
light output
-
Press
button
Activate
=
Remote Start.
The
Vehicle
aftermarket
timer installed:
The system Can be
Lock / Unlock with
the engine running.
Five chirps = Built-in Turbo Timer Control is Active / Press
buttons at the same time to control Engine running five minutes.
2 Hour Time Start
button twice to start the vehicle.
II
" PRORAMMING:
Two Chirps /
LED two pulse
Engine Checking
Voltage
th
push until Four chirps with a long chirp is
Three Chirps /
LED three pulse
Diesel Engine and
15 seconds warn-up
timer
30 minutes run time
parking
+
Press
Activate
Activate
=
Start.
has
Built-in Turbo Timer
Turbo
Control
Press
buttons at the same
time
to
Engine running one
minute.
and
buttons at the same time to start the vehicle.
th
push until five chirps with a long chirp is
Three Chirps /
LED three pulse
Engine Checking
OFF
13
Four Chirps /
LED four pulse
Diesel Engine and
20 seconds warn-up
timer
5 minutes run time
button =
Remote
Built-in Turbo Timer
is
Active:
Control
and
Press
buttons at the same
control
time
to
Engine
three minute.
Four Chirps /
LED four pulse
is
Active:
and
control
running
and
Advertisement
Table of Contents
