Account Configuration - ATCOM Rainbow1 Quick Start Manual

Rainbow1 Quick Start Guide
 Network mode: you can choose DHCP, Static and PPPoE
 DHCP: Rainbow1 default to use DHCP to obtain IP from DHCP
Server.
 Static: If you want to set the IP as static, you should fill IP,
Netmask, Gateway and DNS information.
 PPPoE: If Rainbow1 is connected to the modem, you should fill
ADSL account and password which are assigned by your network
service provider.
Password Configuration
Enter "Network" -> "Advance" page.
There are 2 modes to set the authority of web accessing and
command line: User mode and Admin mode. All the parameters can
be visible and changed in Admin mode while part of them can be
visible in User mode.
 Enable Web Server: enable or disable web access. If choose
"no", you can not access Rainbow1's webpage.
 Admin password: set admin webpage access
password.(username:admin)
 User password: set user webpage access
password.(username:user)
2.2

Account Configuration

Enter "Account" -> "SIP" page to configure SIP account which is
provided from the SIP Server.
ATCOM TECHNOLOGY CO., LIMITED