Account Configuration - ATCOM Rainbow1 Quick Start Manual

Rainbow1 Quick Start Guide
one according to your own situation.
Network mode: you can choose DHCP, Static and PPPoE

DHCP: Rainbow1 default to use DHCP to obtain IP from DHCP Server.

Static: If you want to set the IP as static, you should fill IP, Netmask,

Gateway and DNS information.
PPPoE: If Rainbow1 is connected to the modem, you should fill ADSL

account and password which are assigned by your network service provider.
Password Configuration
Enter "Network" -> "Advance" page.
There are 2 modes to set the authority of web accessing and command line:
User mode and Admin mode. All the parameters can be visible and changed in
Admin mode while part of them can be visible in User mode.
Enable Web Server: enable or disable web access. If choose "no", you can

not access Rainbow1's webpage.
Admin password: set admin webpage access password.(username:admin)

User password: set user webpage access password.(username:user)

2.2

Account Configuration

Enter "Account" -> "SIP" page to configure SIP account which is provided from
the SIP Server.
ATCOM TECHNOLOGY CO., LIMITED