Account Configuration - ATCOM Rainbow2 Quick Start Manual

Rainbow2 Quick Start Guide
Enable Web Server: enable or disable web access. If choose "no", you can

not access Rainbow2's webpage.
Admin password: set admin webpage access password.(username:admin)

User password: set user webpage access password.(username:user)

2.2

Account Configuration

Enter "Account" -> "SIP" page to configure SIP account which is provided from
the SIP Server.
Enable: whether enable this SIP register.

Display Name: This name will display on the screen of Rainbow2. It will

display the name configured for the SIP account by the SIP server
preferentially. It can also be kept blank.
User ID: Username of SIP account.

Authenticate ID: normally is the same as User ID, can also be kept blank if

there is no special requirement from the SIP server.
Password: Password of SIP account.

Sip Server: SIP server address, support both IP address and domain name.

Sip Port: SIP server port, default is 5060.

After configured and clicked 'Submit' to enable register this account, please
check the status of this account in System Status page. The Registration State
will be registered if this account registered successfully.
ATCOM TECHNOLOGY CO., LIMITED